Oven Temperature Converter: Gas Mark, °C, Fan and °F
Convert an oven temperature between gas mark, conventional °C, fan °C and °F. Temperatures on the standard chart use the chart figures; anything else is converted exactly and matched to the nearest gas mark. Gas marks are dial settings, so charts round them and a few rows differ between sources. This is a guide to the numbers, not a measurement of your oven.
Convert an oven temperature
Convert between gas mark, conventional °C, fan °C and °F. Standard temperatures use a reference chart; any other temperature is converted exactly and matched to the nearest gas mark.
Enter a conventional (non-fan) oven temperature from 50 to 300°C.
Standard gas marks from ¼ to 9.
How much lower a fan oven is set than a conventional oven. 20°C is the default, not a rule for every oven.
How this was worked out
Gas mark conversion chart
The reference chart this converter uses for standard temperatures. The matching row is highlighted after you convert.
| Gas mark | Conventional °C | Fan °C | °F (chart) | Source check |
|---|---|---|---|---|
| ¼ | 110°C | 90 | 225°F | Sources differ |
| ½ | 120°C | 100 | 250°F | Sources differ |
| 1 | 140°C | 120 | 275°F | |
| 2 | 150°C | 130 | 300°F | |
| 3 | 160°C | 140 | 325°F | Sources differ |
| 4 | 180°C | 160 | 350°F | |
| 5 | 190°C | 170 | 375°F | |
| 6 | 200°C | 180 | 400°F | |
| 7 | 220°C | 200 | 425°F | |
| 8 | 230°C | 210 | 450°F | |
| 9 | 240°C | 220 | 475°F | Sources differ |
Fan column uses a fan reduction of 20°C.
Rows marked “Sources differ”: published charts list gas mark ¼ between 100°C or below and 120°C, gas mark ½ as 120°C or 130°C, gas mark 3 as 160°C or 170°C, and gas mark 9 as 240°C or 250°C and above. Chart °F figures are rounded, so they can differ slightly from the exact conversion of the °C figure.
Oven Temperature Converter for Gas Mark, Celsius, Fan and Fahrenheit
Use this oven temperature converter to switch between gas mark, degrees Celsius, fan oven temperature and degrees Fahrenheit. Choose what your recipe gives you, enter the value, and the converter shows the other three. It is built for UK recipes, where gas marks, conventional Celsius, fan Celsius and Fahrenheit all turn up, sometimes in the same cookbook.
How the conversions work
Gas marks are a set of dial settings rather than a continuous scale, so published charts list one fixed Celsius temperature for each mark. This converter follows a single reference chart for temperatures that appear on it. Anything else is converted with the exact formulas, and the converter then names the nearest standard gas mark and how far away your temperature is.
- Standard temperatures: a gas mark, °C or °F value that appears on the reference chart uses the chart’s figures.
- Custom temperatures: °F = °C × 9/5 + 32 and °C = (°F – 32) × 5/9, with the nearest standard gas mark and the difference shown.
- Halfway cases: if a temperature sits exactly between two gas marks, both are shown.
Why a chart says 350°F but the exact conversion is 356°F
Chart temperatures are rounded. The reference chart lists gas mark 4 as 180°C and 350°F, yet 180°C converts exactly to 356°F and 350°F converts exactly to 176.7°C. Recipes use both versions, so for standard values the converter shows the chart figure and points out the exact figure beside it.
Fan oven temperature: the 20°C default and your oven’s own guidance
Many UK guides reduce a conventional temperature by about 20°C for a fan oven, and this converter uses 20°C as its default. It is a convention, not a fixed property of every oven. Published guides give figures from 10°C to 20°C, and oven manufacturers publish their own advice. You can change the fan reduction in the converter. If your oven manual or the recipe gives its own fan temperature, use that.
Where charts disagree
Published charts do not agree on every row. Gas marks ¼, ½, 3 and 9 are listed with different Celsius values in different places. For example, gas mark 3 appears as both 160°C and 170°C, and gas mark ½ as both 120°C and 130°C. This converter uses one chart and marks those rows “Sources differ” so you can see where the figures vary. If your recipe or oven manual says something different for one of those marks, follow it.
Gas marks above 9
Some charts list a gas mark 10 at around 260°C, but it is not standard across ovens, so this converter stops at gas mark 9.
How to use this converter
- Choose what you are converting from – conventional Celsius, fan Celsius, Fahrenheit or gas mark.
- Enter the temperature or pick the gas mark.
- Check the fan reduction – leave the 20°C default or enter your oven’s own figure.
- Click Convert to see conventional, fan, Fahrenheit and gas mark equivalents, plus a note on how each was worked out.
Frequently Asked Questions
What is gas mark 4 in °C, fan and °F?
Gas mark 4 is 180°C in a conventional oven, which is 160°C in a fan oven at the default 20°C fan reduction, and 350°F on the reference chart. The exact conversion of 180°C is 356°F, which charts round to 350°F.
Why does 180°C show as 350°F on the chart but 356°F in an exact conversion?
Gas mark charts round their temperatures. For values on the reference chart, the converter shows the chart figure and the exact figure side by side. For any other temperature it uses the exact formulas, where °F = °C × 9/5 + 32.
How do I convert a conventional oven temperature to a fan oven?
Subtract the fan reduction from the conventional temperature. This converter defaults to 20°C, so 200°C becomes 180°C. That is a common convention rather than a rule for every oven: published guides give figures from 10°C to 20°C. Use your oven manual or the fan temperature in the recipe if either is given, and change the fan reduction in the converter to match.
What happens if my temperature is not on the gas mark chart?
The converter works out the exact conversion, then names the nearest standard gas mark and shows how far away your temperature is. If it sits exactly halfway between two gas marks, both are shown.
Why do some charts show different temperatures for gas marks ¼, ½, 3 and 9?
Gas marks are dial settings, and published charts round them differently. Gas mark 3 appears as both 160°C and 170°C, gas mark ½ as both 120°C and 130°C, and gas mark 9 as 240°C or higher. This converter uses one reference chart and flags those rows so you can see where sources differ.
Is there a gas mark above 9?
Some charts list a gas mark 10 at around 260°C, but it is not standard across ovens, so it is not included in this converter.
Does this tell me what my oven is really doing?
No. It converts between temperature scales, but ovens can run hotter or cooler than the temperature set. An oven thermometer is the reliable way to check.