!
This is an estimate, not your official result. Universities set their own weightings, boundaries, rounding and borderline rules. Replace the example weightings below with the ones in your course handbook or regulations.

UK Degree Classification Calculator

Estimate your undergraduate honours classification from your module marks or year averages, using year weightings you can edit.


1. Year weightings and credits

The weightings must add up to 100%. The starting values of 0%, 33% and 67% are an illustrative default, not a UK-wide standard. Many full-time years are 120 credits, but check yours.

%
credits
%
credits
%
credits
Total weighting: 100% (adds up to 100%)
Example patterns (examples only):

2. Enter your results

Enter the credits and mark for each module and choose its year. Marks are weighted by credits within each year. Leave unfinished modules out and they will count as remaining credits. Completely blank rows are ignored.

Advanced settings: boundaries, rounding and borderline zone

Change these only if your university uses different figures.

%
%
%
%
points

Year-by-year breakdown

How sensitive is the result to your final-year marks?

How this calculator works: module marks are weighted by credits within each year, then each year average is weighted by the percentage you set. The overall average is compared with your classification boundaries. It does not model discretion, dropped modules, capped resits or other university-specific rules, so treat the result as an estimate. It is designed for undergraduate honours degrees only.

UK Degree Classification Calculator

Use this UK degree classification calculator to estimate whether your marks point to a First, 2:1, 2:2 or Third-class honours degree. Enter your module marks and credits, or your year averages if you already know them, set the weighting each year carries at your university, and see an estimated overall average and classification. It also shows how far you are from the next class and, if you have not finished yet, the average you would need on your remaining credits.

How are UK honours degrees classified?

Undergraduate honours degrees in the UK are awarded in classes, usually based on your overall weighted average mark. The boundaries below are commonly used, but each university sets its own regulations, so treat them as typical rather than universal.

ClassificationCommon nameTypical overall average
First-class honoursFirst70% or above
Upper second-class honours2:160% to under 70%
Lower second-class honours2:250% to under 60%
Third-class honoursThird40% to under 50%
Below the Third-class thresholdOther awards may applyUnder 40%

In this calculator the boundaries are editable under Advanced settings.

How the calculation works

The calculator works in two steps, which is how many universities build an overall mark:

  1. Within each year, every module mark is weighted by its credits, so a 40-credit module counts twice as much as a 20-credit module. A mark of 80 on 20 credits and 50 on 40 credits gives a credit-weighted average of 60, not the 65 you would get by averaging the two marks.
  2. Across the degree, each year average is multiplied by the percentage weighting you set for that year, and the results are added together.

Worked example (made-up figures)

These marks are invented to show the method, using the default 0%, 33% and 67% weightings. They are not real results.

YearModules (credits at mark)Credit-weighted averageWeightingContribution
Year 1Not countedNot counted0%0.00
Year 220 at 65, 40 at 58, 60 at 7165.67%33%21.67
Final year40 at 72, 20 at 60, 60 at 6868.00%67%45.56
Overall100%67.23% (2:1)

Year weighting patterns

Universities weight years differently, and some do not count the first year at all. The calculator starts with 0%, 33% and 67% for Year 1, Year 2 and the final year as an illustrative default, not a UK-wide standard. Always replace these with the weightings in your course handbook or university regulations.

PatternYear 1Year 2Final year
Illustrative default0%33%67%
Example 10%40%60%
Example 20%50%50%
Example 310%30%60%

These are examples only. They are not a list of what any particular university uses.

How to use the calculator

  1. Set the year weightings so they add up to 100%, and check the total credits for each year (many full-time years are 120 credits).
  2. Choose how to enter results: module marks and credits, or year averages.
  3. Enter your results. In module mode, pick the year for each module. Leave unfinished modules out and the calculator treats them as remaining credits.
  4. Select Calculate classification. Open Advanced settings first if your university uses different boundaries, rounding or a different borderline range.

Working out what you need in your final year

If you have not entered every credit for a weighted year, the calculator shows a provisional estimate and a table of the average you would need across all remaining credits to reach each class. It assumes one average across those credits, so it is a planning guide rather than a prediction. A figure above 100% means that class can no longer be reached under the settings you entered.

The sensitivity section shows two separate what-if views. View A moves your whole final-year average up or down by a set number of points. View B keeps every mark you have already entered fixed and changes only the mark on your remaining final-year credits, so it shows the range of outcomes still open to you.

What this calculator does not model

  • Discretion and borderline rules, such as profile rules some universities apply
  • Rules that drop your lowest-scoring modules or count only your best credits
  • Capped resit marks, compensation, and pass or fail thresholds on individual modules
  • Special rules for dissertations or final projects
  • Placement, study abroad and foundation years, which may or may not count
  • Scottish honours structures and other four-year patterns, which the three-stage setup may not fit
  • Master’s degrees (Distinction, Merit, Pass) and other postgraduate awards
  • Extenuating circumstances, academic misconduct decisions or exam board decisions

Frequently Asked Questions

How is a UK degree classification calculated?

Most universities calculate an overall weighted average from your module marks. Marks are weighted by credits within each year, then each year is weighted by a percentage set in the university regulations. The overall figure is compared with classification boundaries, commonly 70, 60, 50 and 40. Details such as rounding, dropped modules and borderline rules differ, so this calculator gives an estimate only.

What are the degree classification boundaries in the UK?

A common pattern is 70% or above for a First, 60% to under 70% for a 2:1, 50% to under 60% for a 2:2, and 40% to under 50% for a Third. Universities set their own regulations, so check yours. The boundaries in this calculator can be edited under Advanced settings.

Does my first year count towards my degree classification?

At many universities the first year must be passed but carries no weighting towards the final classification, while others give it a small weighting. This calculator starts with Year 1 at 0%, and you can change it. Check your course handbook for the rule that applies to you.

Why are marks weighted by credits?

Credits show how much of a year each module covers. A 40-credit module represents twice as much study as a 20-credit module, so it has twice the influence on your year average. Treating every module equally would give a different result unless all of your modules have the same number of credits.

What is a borderline degree classification?

A borderline result is an overall mark just below a classification boundary. Some universities have rules that allow an exam board to consider raising the class, for example by looking at the marks in your final-year credits. The rules vary, so this calculator flags borderline results but does not apply them.

Can I use this if I have not finished my final year?

Yes. Enter the modules or averages you have so far and leave out the rest. The calculator shows a provisional estimate based on your current weighted average, and the average you would need on your remaining credits to reach each class. Treat it as a planning guide.

Why does the rounding setting matter?

Some universities round the overall average to a whole number before applying the boundaries, so 69.5 could become 70. Others use the unrounded figure. The calculator defaults to no rounding and lets you choose whole-number or one-decimal rounding. Check which your university uses.

Does this work for Master’s degrees or Scottish degrees?

It is designed for undergraduate honours degrees. Taught Master’s degrees are usually classified as Distinction, Merit or Pass, which this calculator does not cover. Scottish honours degrees and four-year structures may weight years differently, so check how your university counts each stage before relying on the estimate.

Is this my official degree classification?

No. It is an estimate based on the figures and rules you enter. Your official classification is decided by your university under its regulations, usually by an exam board.

This calculator provides an illustrative estimate only and is not academic advice. Your official classification is determined by your university under its own regulations.