Estimates only. Real charging times depend on your car’s charging curve, battery temperature and the charger’s actual output. The starting values below are examples, so replace them with your own.

EV Charging Time Calculator

Work out how long an electric car takes to charge from battery size, charger power, start and target charge, and charging losses. You can also add your car’s own charging limit.


kWh
Use the usable (net) capacity if you know it, not the larger gross figure. Check your car handbook.
%
Current battery level.
%
Level you want to reach, up to 100%.
kW
The power the charger can supply. Pick a common level or type your own.
%
An assumption, not a measured figure. 10% is an illustrative starting value. Energy is lost as heat and in conversion.
kW
The highest rate your car accepts (AC onboard charger or DC peak). Leave blank if unknown.
miles/kWh
Enter your real-world miles per kWh. It is applied to the energy added to the battery. Leave blank to hide miles added.
Advanced: charging slows near full (optional)

Many EVs slow down at higher charge levels, especially on rapid DC chargers. This setting applies one simple slow-down step, so it gives a rough estimate only and cannot reproduce your car’s real charging curve. Standard results stay on a constant-power basis and the tapered figure is shown separately.

%
Charge level where charging slows. Illustrative default.
%
As a percentage of the effective charging power. Illustrative default.
How this calculator works: Energy added to the battery is battery capacity multiplied by the percentage-point increase. Energy drawn from the charger is that figure divided by charging efficiency. Charging time is the energy drawn from the charger divided by the effective charging power, which is the lower of the charger power and your car’s limit. Results are illustrative estimates, not a guarantee of real charging times.

How Long Does It Take to Charge an Electric Car?

This EV Charging Time Calculator estimates how long an electric car takes to charge from the size of its battery, the power of the charger, where you start and where you want to finish, and the energy lost during charging. You can also enter your car’s own maximum charging rate and, if you wish, add a rough slow-down setting for the last part of a charge.

How EV Charging Time Is Calculated

  1. Energy added to the battery = usable battery capacity multiplied by the percentage-point increase in charge.
  2. Energy drawn from the charger = battery energy divided by charging efficiency (100% minus your assumed losses).
  3. Effective charging power = the lower of the charger power and your car’s maximum charging rate.
  4. Charging time = energy drawn from the charger divided by the effective charging power.

Worked Example

Take a 60 kWh usable battery charged from 20% to 80% with 10% losses. The battery gains 36 kWh, so about 40 kWh is drawn from the charger. This table assumes the car can accept the full charger power and that charging stays at a constant rate.

Charger powerEstimated time (constant power)
3.6 kW11 h 7 min
7 kW5 h 43 min
11 kW3 h 38 min
22 kW1 h 49 min
50 kW48 min
150 kW16 min

Illustrative figures only. In practice, a car that cannot accept the full power, or that slows down as it fills, will take longer than these constant-power results.

Common Charger Power Levels

The power levels in the calculator are common reference points. The supply descriptions below are approximate electrical equivalents, and actual charger output depends on the installation and the car.

Charger powerApproximate supplyTypical setting
3.6 kWAbout 16 A, single-phase ACSlower home or destination charging
7 kWAbout 32 A, single-phase ACCommon home wallbox power
11 kWAbout 16 A per phase, three-phase ACWhere a three-phase supply is available
22 kWAbout 32 A per phase, three-phase ACThree-phase AC; not all cars can accept this rate
50 kWDCPublic rapid charging
150 kWDCHigher-power public DC charging

What Affects EV Charging Time?

  • Your car’s limit: A car can only accept charge up to its own maximum rate, so a more powerful charger may make no difference.
  • Charging losses: Energy is lost as heat and in conversion, so you draw more from the charger than reaches the battery.
  • Slow-down at high charge levels: Many cars reduce their charging rate as the battery fills, especially on rapid DC chargers.
  • Battery temperature: A very cold or very hot battery can charge more slowly.
  • Shared chargers: Some chargers share power between connectors, which can reduce the rate you receive.

Looking for the cost of a charge instead? Use the EV Charging Cost Calculator.

Frequently Asked Questions

How long does it take to charge an electric car?

It depends on the battery size, how much charge you need, the charger power and your car’s charging limit. As a simple guide, divide the energy needed (including losses) by the charging power. For example, adding 36 kWh to a battery with 10% losses means drawing about 40 kWh from the charger, which takes about 5 hours 43 minutes at a steady 7 kW.

How do you calculate EV charging time?

Energy added to the battery is battery capacity multiplied by the percentage-point increase in charge. Energy drawn from the charger is the battery energy divided by charging efficiency. Charging time is the energy drawn from the charger divided by the effective charging power, which is the lower of the charger power and your car’s maximum charging rate.

Why does EV charging slow down after 80%?

Many electric cars reduce their charging rate as the battery fills, particularly on rapid DC chargers, to protect the battery. How much and when varies by car, battery temperature and charger. The optional slow-down setting in this calculator is a rough single-step estimate, not your car’s actual charging curve.

Will a faster charger always charge my car faster?

No. Charging speed is limited by whichever is lower: the charger power or the maximum rate your car can accept. If your car accepts 7 kW on an AC charger, a 22 kW charger will not charge it faster than a 7 kW one. Enter your car’s maximum charging rate to reflect this.

What charging losses should I use?

Some energy is lost as heat and in conversion between the charger and the battery, so you draw more from the charger than reaches the battery. This calculator starts at 10% as an illustrative assumption. Real losses vary with the charger, cable, temperature and car, so change it if you have measured figures.

Should I use usable or gross battery capacity?

Use the usable (net) capacity if you can find it, because that is the energy the car can actually store and use. Manufacturers sometimes quote a larger gross figure. Your car handbook or manufacturer specification will usually list both.

Should I charge to 80% or 100%?

That depends on your car and your journey. Manufacturers give different guidance, so check your handbook. This calculator simply shows how the estimated time changes for whatever start and target levels you choose.

Does this calculator show charging cost?

No. This calculator estimates time and energy only. To estimate what a charge costs, use the EV Charging Cost Calculator on this site.