Tile & Flooring Calculator
Work out how many tiles or boxes of flooring you need for a rectangular or L-shaped room, with a pattern-based wastage allowance and optional cost estimate.
Enter the length and width of the room.
Rectangle A
Rectangle B
Split the L-shaped room into two rectangles, measure each one separately, and enter both here. The two areas are calculated independently and added together.
If you know how many tiles come in a box, enter it here and we’ll also work out how many boxes to buy. Leave blank to see tile count only.
Check the box or product label for the exact coverage — this varies by brand and is the figure the box calculation uses.
Each pattern fills in a typical starting estimate, but this varies by installer, room complexity and tile size — edit the figure if you have a different estimate from your fitter or supplier.
Full Breakdown
Tile & Flooring Calculator: How Many Tiles or Boxes Do You Need?
Our Tile & Flooring Calculator works out how many tiles, planks or boxes of flooring to buy for a rectangular or L-shaped room. It applies a wastage allowance based on your chosen laying pattern, rounds up to whole boxes so you’re not left short, and gives an optional cost estimate.
How to Use This Calculator
- Choose your units — metric (metres/centimetres) or imperial (feet/inches).
- Select your room shape — rectangular, or L-shaped if the room isn’t a simple rectangle.
- Enter your room dimensions. For an L-shaped room, split it into two rectangles and measure each one.
- Choose how you want to calculate quantity — by tile/plank size, or by the coverage printed on a box.
- Pick your laying pattern — straight, diagonal or herringbone/brick — which fills in a starting wastage estimate you can edit.
- Optionally add a price per box or per area unit to see an estimated total cost.
- Click Calculate to see the tiles or boxes needed, the spare material left over, and a full breakdown.
Typical Wastage Allowances by Pattern
These are commonly used starting points from tiling and flooring suppliers, not a fixed rule — actual cutting waste depends on your specific tile size, room shape and the number of obstacles (pipes, alcoves, doorways) in the room.
| Laying Pattern | Typical Wastage | Why |
|---|---|---|
| Straight lay / grid | ~10% | Minimal cuts, mainly at the room edges |
| Diagonal (45°) | ~15% | Larger corner off-cuts from angled edges |
| Herringbone / brick bond | ~15–20% | More angled cuts and pattern matching at the perimeter |
Large-format tiles, complex room shapes, and patterned or directional materials often need a higher allowance than the defaults above. If your supplier or fitter gives you a specific figure, use that instead.
Working Out an L-Shaped Room
An L-shaped room isn’t one length multiplied by one width — doing that overstates the area because it includes the “missing corner” that isn’t part of the room. Instead, split the room into two simple rectangles (for example, the main body of the room and the smaller extension), measure each one, and this calculator adds the two areas together to get the true floor area.
Tiles vs. Boxes: Which Should You Use?
- By tile/plank size: Enter the dimensions of a single tile or plank. The calculator works out the estimated number of individual tiles you need. If you also know how many tiles come in a box, add that too and it will convert this into a box count.
- By box coverage: Many flooring products (laminate, vinyl click, engineered wood) quote coverage per box rather than a single-unit size. Enter that figure directly from the product packaging, and the calculator works out how many boxes to buy.
Coverage per box varies between brands and even between batches, so always check the figure printed on the box or product page rather than assuming a round number.
Why Round Up to Whole Boxes?
Flooring and tiles are sold as complete boxes — you can’t buy 0.6 of a box. Rounding up also means you’ll have spare material on hand for repairs later, and tiles from the same production batch are more likely to match in colour than a later top-up order. This calculator always rounds the box count up and shows you the resulting spare material, so you can see how much extra you’d be carrying.
Frequently Asked Questions
Is the wastage percentage this calculator uses an official standard?
No. The pattern defaults shown (around 10% for straight lay, 15% for diagonal, and 20% for herringbone) are commonly used starting points from flooring and tiling suppliers, not a regulated or universal figure. Your actual wastage depends on tile size, room complexity, the skill of the installer, and how many obstacles the room has. Edit the wastage field with your own figure whenever you have one.
Why does my tile count look different from my box count?
The tile count is the estimated number of individual tiles needed to cover the area, including your wastage allowance. The box count only appears once you tell us how many tiles come in a box: we divide the tile count by that number and round up to the next whole box, so the box count is usually a little higher than a straight division would suggest.
How do I measure an L-shaped room correctly?
Split the room into two rectangles at the point where the shape changes direction, measure the length and width of each rectangle separately, and enter both into the calculator. It calculates each rectangle’s area independently and adds them together – multiplying one overall length by one overall width would include floor space that isn’t actually part of the room.
Should I use the price-per-box or price-per-area cost option?
Use price-per-box if your supplier prices the product by the box (common for boxed laminate, vinyl click flooring and many tiles). Use price-per-area if you’re quoted a rate per square metre or square foot, such as for some natural stone or bespoke tiling. The calculator multiplies the box price by the number of boxes needed, or the area price by the actual rounded-up area you’d be buying – not just the bare room size.
Does this calculator include grout, adhesive or underlay?
No, this calculator covers tile or flooring quantities only. Grout, adhesive, underlay, trims and skirting are not included and should be estimated separately, typically using coverage figures from those specific products.
What if my tile dimensions and box coverage don’t seem to match?
The calculator only uses one input at a time – either the tile/plank size or the box coverage figure, depending on which mode you’ve selected – and it doesn’t try to reconcile the two. If you know the exact coverage printed on your box, use “By box coverage” mode directly: back-calculating it from a tile size can introduce small rounding differences from the manufacturer’s own figure.