Nothing is pre-filled. Enter your own prices and efficiencies from your bills, supplier and product data. Tick the options you want to compare (at least two). Prices are per unit as billed; the calculator converts everything to the cost of each kWh of useful heat.

Heating Cost Comparison Calculator

Compare mains gas, heating oil, LPG, direct electric heating and a heat pump on the same basis: the running cost of each kWh of heat delivered to your home.


Enter as a percentage, for example 90 (not 0.9).
Only costs that differ between options. Used when annual heat demand is entered.
Enter the figure from your supplier or product data. Nothing is pre-filled.
Enter as a percentage, for example 90 (not 0.9).
Only costs that differ between options. Used when annual heat demand is entered.
Enter the figure from your supplier or product data. Nothing is pre-filled.
Enter as a percentage, for example 90 (not 0.9).
Only costs that differ between options. Used when annual heat demand is entered.
Enter as a percentage, for example 90 (not 0.9).
Only costs that differ between options. Used when annual heat demand is entered.
Heat delivered per unit of electricity, for example 3. Your installer or the product data should give a seasonal figure.
Only costs that differ between options. Used when annual heat demand is entered.
Heat delivered into your home, not fuel bought. Enter it to see annual running costs.
Pick your current option to see the yearly difference. Needs annual heat demand.
How this calculator works: cost per kWh of heat = the price of a kWh of fuel or electricity divided by the efficiency (or COP for a heat pump). Oil and LPG prices are converted from pence per litre using the energy content you enter. Running costs only: installation, grants, maintenance and carbon are not included unless you add fixed costs. Results are illustrative estimates based on your inputs.

Compare Gas, Oil, LPG, Electric and Heat Pump Heating Costs

The Heating Cost Comparison Calculator works out what each kWh of useful heat costs from mains gas, heating oil, LPG, direct electric heating and a heat pump, so you can compare them on a like-for-like basis. Fuels are priced in different units and turn into heat with different efficiency, so comparing a gas price with an electricity price directly can mislead. You enter your own prices and efficiencies, and nothing is pre-filled.

What is the cost per kWh of heat?

It is the price of the energy you buy divided by how much of it ends up as heat in your home. A boiler loses some energy up the flue, so each kWh of heat costs more than each kWh of gas or oil. A heat pump moves heat rather than just creating it, so it can deliver more than one kWh of heat for each kWh of electricity. Dividing by efficiency (or by COP for a heat pump) puts every option on the same scale.

How the cost per kWh of heat is calculated

OptionCost per kWh of heatWhat you enter
Mains gasGas price per kWh divided by efficiencyPrice in p/kWh, efficiency in %
Heating oilPrice per litre divided by kWh per litre, then divided by efficiencyPrice in p/litre, energy content in kWh/litre, efficiency in %
LPGPrice per litre divided by kWh per litre, then divided by efficiencyPrice in p/litre, energy content in kWh/litre, efficiency in %
Direct electricElectricity price per kWh divided by efficiencyPrice in p/kWh, efficiency in %
Heat pumpElectricity price per kWh divided by COPPrice in p/kWh, COP or SCOP

Worked example

These round numbers are only to show the arithmetic. They are not current prices or typical performance figures. Suppose gas costs 7p per kWh and a boiler is 90% efficient: 7 divided by 0.90 gives about 7.78p per kWh of heat. Suppose electricity costs 25p per kWh and a heat pump has a COP of 3: 25 divided by 3 gives about 8.33p per kWh of heat. The break-even COP against that gas boiler is 25 divided by 7.78, about 3.21, so on these made-up numbers the heat pump would need a COP above 3.21 to cost less to run.

How to use this calculator

  1. Tick the options to compare. You need at least two. A row also ticks itself when you start typing in it.
  2. Enter your unit prices from your bills or supplier. Oil and LPG are entered in pence per litre.
  3. Enter the energy content for oil and LPG in kWh per litre from your supplier or product data.
  4. Enter efficiency or COP for each option from manufacturer data, your installer or your own best estimate.
  5. Optionally add annual heat demand and fixed costs to see annual running costs, and choose a baseline to see the yearly difference.
  6. Press Calculate. Results stay hidden until you do.

Why the cheapest fuel price is not always the cheapest heat

A low price per kWh does not guarantee low heating costs. A fuel with a low unit price but low efficiency can cost more per kWh of heat than a dearer fuel that is used efficiently. Heat pump performance is also not a single fixed number: it depends on the installation, the temperatures it has to deliver and the weather. That is why the calculator shows the break-even COP and a set of COP scenarios alongside your own figure.

What this calculator does not include

  • Installation costs, grants and payback periods.
  • Servicing and maintenance, unless you enter them as annual fixed costs.
  • Time-of-use or multi-rate tariffs. Enter a single blended electricity price, or see the Economy 7 comparison on this site.
  • Solar generation, battery storage and carbon emissions.
  • Differences in performance between space heating and hot water. Use a figure that suits how you will use the system.

How this differs from other energy calculators

The Gas Cost Calculator and the Electricity Cost Calculator look at running costs for one fuel at a time, and the Heating Oil Calculator does the same for oil. This calculator puts the fuels side by side per kWh of heat. The Heat Pump Payback Calculator adds installation cost, grants and payback, which this one deliberately leaves out.

Frequently Asked Questions

What does cost per kWh of heat mean?

It is the cost of each kWh of heat that actually reaches your home, rather than each kWh of fuel you buy. It is worked out by dividing the price of a unit of energy by the efficiency of the system that turns it into heat. Because a boiler loses some energy and a heat pump delivers more heat than the electricity it uses, this gives a fairer comparison than fuel prices alone.

Why does the calculator ask for kWh per litre for oil and LPG?

Oil and LPG are normally sold by the litre, but efficiency and heat are measured in kWh. The energy content in kWh per litre converts the price per litre into a price per kWh of fuel. The figure depends on the fuel and can vary between suppliers, so there is no pre-filled value. Check your supplier or product data sheet and enter it yourself.

What efficiency should I enter?

Enter the efficiency of your own appliance as a percentage, for example 90 rather than 0.9. A manufacturer rating, an energy label or your installer can tell you the figure for your boiler or heater. A seasonal figure is generally more realistic than a laboratory peak figure, and efficiency in a real home can be lower than the rating if the system is old or poorly set up.

What is the difference between COP and SCOP?

COP is the heat a heat pump delivers for each unit of electricity it uses at a given moment, and it changes with outdoor temperature and flow temperature. SCOP is a seasonal average across a typical heating season. For a running cost comparison a seasonal figure for your own installation is usually the better input, and your installer or the product data should provide one. This calculator treats the figure you enter as an assumption, not a guarantee.

How is the break-even COP calculated?

The break-even COP is the heat pump electricity price divided by the other option cost per kWh of useful heat. At that COP the heat pump and the other option cost the same per kWh of heat. If your heat pump performs above the break-even COP it is cheaper to run on these inputs, and below it the other option is cheaper. It uses only the prices and efficiencies you entered.

Are standing charges and service costs included?

The headline cost per kWh of heat never includes standing charges or other fixed costs. If you enter annual heat demand, you can also enter annual fixed costs for each option, such as a standing charge you would only pay with that option, tank rental or servicing, and they are added to the annual running cost. Only include fixed costs that would differ between the options you are comparing.

Does this include installation costs or grants?

No. It compares running costs only. For installation costs, grants and payback periods use the Heat Pump Payback Calculator on this site.

This calculator gives illustrative running-cost estimates based on the figures you enter. It is not financial, energy or installation advice. Check prices, efficiencies and any grant or tariff terms with your supplier or an MCS-certified installer.