Wood burner fuel cost calculator
Estimate the fuel cost of running a wood burner for a heating season with seasoned logs, kiln-dried logs or heat logs.
1. Your fuel
2. Fuel price
3. Your stove
4. Heating season
Optional: extra costs and comparison with gas or electricity
Leave blank to skip. Kindling is added to the seasonal running cost. The chimney sweep is annual maintenance and is shown separately, never added to the seasonal total. Comparison prices are never preset: enter your own.
Wood Burner Fuel Cost Calculator UK
Our Wood Burner Fuel Cost Calculator estimates what it costs to run a wood burner for a heating season. Choose seasoned logs, kiln-dried logs or heat logs, enter your own fuel price and moisture content, and see the fuel needed, the firewood cost for the season and the cost per kWh of useful heat. It is built for anyone working out the cost of heating with logs, kiln-dried wood or heat logs.
Two ways to use the calculator
- Calculate my fuel requirements uses your stove’s rated output, average load, burning hours and burning days per week to work out how much fuel you need and what it costs.
- Calculate what my current fuel usage costs starts from the weight, bags or logs you already burn each week and shows the season cost, the heat delivered and the cost per kWh.
How the wood burner running cost is calculated
- Energy per kg of fuel = (19.5 × (100 − moisture) ÷ 100 − 0.02443 × moisture) ÷ 3.6, in kWh per kg, with moisture as a percentage on a wet basis.
- Effective heat output = rated output × average load.
- Daily heat = effective heat output × burning hours.
- Fuel needed = daily heat ÷ (energy per kg × stove efficiency). Efficiency is applied once.
- Fuel cost = kg of fuel × price per kg, with your price converted from per tonne, per bag or per m³.
The 19.5 is the net energy of oven-dry wood in MJ per kg, and 0.02443 is the energy in MJ per kg needed to evaporate 1% moisture. Dividing by 3.6 converts MJ to kWh.
Why moisture content matters
Water in firewood has to be driven off before the wood gives out useful heat, so the same weight of wetter wood delivers less energy. The table shows the net energy per kg from the formula above, and how much more fuel is needed for the same heat compared with 20% moisture.
| Moisture (wet basis) | Net energy per kg (kWh) | Fuel needed for the same heat |
|---|---|---|
| 10% | 4.81 | 0.87 times as much |
| 15% | 4.50 | 0.93 times as much |
| 20% | 4.20 | Baseline |
| 25% | 3.89 | 1.08 times as much |
| 30% | 3.59 | 1.17 times as much |
| 40% | 2.98 | 1.41 times as much |
These are calculated values on the assumptions listed below, so treat them as illustrative. Most fuel suppliers quote moisture on a wet basis. If your meter reads on a dry basis, the calculator converts it using wet basis = dry basis ÷ (100 + dry basis) × 100.
Seasoned logs, kiln-dried logs and heat logs
The calculator covers three fuels in a wood burner: seasoned logs, kiln-dried logs, and heat logs or briquettes. Each has a labelled starting moisture value that you can replace with a measured reading. Wood pellets, coal and smokeless fuel are not included in this version. For a wider comparison of heating fuels, see the heating cost comparison calculator below.
Starting values and sources
Starting values were checked against the sources below in November 2026. They are assumptions, not measurements of your fuel or stove, and every one can be overridden except the physical constants.
| Item | Value used | Basis |
|---|---|---|
| Energy of oven-dry wood | 19.5 MJ/kg net (fixed) | About 19.5 GJ per tonne per COFORD; stemwood values of 19.1 to 19.5 MJ/kg in the Åbo Akademi table are consistent. |
| Moisture correction | 0.02443 MJ/kg per 1% (fixed) | Enthalpy of vaporisation of water at 25°C, as used in the Åbo Akademi infosheet formula. |
| Seasoned logs moisture | 20% (assumed) | Defra says wood air dried under cover for 12 months or two summers can reach around 20%. There is no set standard for seasoned wood, so treat it as an optimistic starting point. |
| Kiln-dried logs moisture | 20% (assumed) | Defra says kiln-dried wood should be 20% or less, and Woodsure Ready to Burn is 20% or less. This is the upper limit, so many bags will be drier. |
| Heat logs / briquettes moisture | 12% (assumed) | ISO 17225-3 limits the top graded wood briquette class (A1) to 12% and the other classes to 15%. Check your pack. |
| Stove efficiency | 65% (starting value) | Minimum seasonal space heating efficiency for new closed-fronted solid fuel local space heaters other than pellet stoves from 1 January 2022 under retained Regulation 2015/1185. A floor, not a typical figure. |
| Heating season | October to April (illustrative) | Not sourced. Change it to match your own use. |
| Rated output, load, hours, days, prices | None | You enter these. No preset fuel, gas or electricity prices are used. |
Sources:
- Defra: How to get the most from your stove or open fire (moisture, kiln-dried and seasoned wood, smoke control areas)
- Ready to Burn scheme, run by Woodsure on behalf of Defra
- COFORD: Wood as a Renewable Source of Energy (net calorific value of oven-dry wood, efficiency on a net basis)
- Åbo Akademi SECURE-BIO-SUPPLY: Energy content and density of forest biomass (net calorific value as received formula)
- legislation.gov.uk: Regulation (EU) 2015/1185, Annex II (stove efficiency requirements)
- Natural Resources Canada: graded wood briquettes, CAN/CSA-ISO 17225-3 (briquette moisture classes)
Smoke control areas
This calculator does not check whether you can burn wood at your address. In a smoke control area you can only legally burn wood on a Defra exempt appliance. See smoke control areas: the rules on GOV.UK and ask your local council.
Frequently Asked Questions
How much does it cost to run a wood burner?
It depends on your fuel price, how dry the fuel is, your stove’s efficiency and how many hours you burn. This calculator works it out from your own figures: the heat you need, divided by the energy in each kg of fuel and by the stove’s efficiency, multiplied by your price per kg. Fuel prices vary by supplier and fuel type, so the calculator does not assume one.
How much wood does a wood burner use?
It depends on the heat your stove actually gives out, not just its rated output. The hours-based method multiplies the rated output by your average load to get the effective heat output, then by your burning hours to get the daily heat. The fuel needed is that heat divided by the energy per kg of fuel and by the stove’s efficiency. Enter your own output, load and hours for a realistic figure.
How does moisture content change the amount of wood I need?
Water in the wood has to be evaporated before the wood gives useful heat, so wetter wood gives less energy per kg. On the assumptions used here, logs at 20% moisture (wet basis) give about 4.20 kWh of net energy per kg, while logs at 40% give about 2.98 kWh per kg. The same heat therefore needs roughly 41% more wood at 40% moisture.
What moisture content should firewood have?
Defra guidance says logs should be at 20% moisture content or less before they are burned in a stove, and logs sold under the Woodsure Ready to Burn scheme are 20% or less. Kiln-dried wood should be at or below 20%. Seasoned wood has no set standard, so check yours with a moisture meter before burning.
Are kiln-dried logs or seasoned logs cheaper to burn?
It depends on the price you pay per kg and the moisture each fuel really has. Kiln-dried logs should have a moisture content of 20% or less, while seasoned logs vary with how long and how well they have dried. Run the calculator once for each fuel using its real price and moisture, then compare the cost per kWh of heat.
What stove efficiency should I enter?
Use the efficiency in your stove’s manufacturer data if you have it. The starting value of 65% is the minimum seasonal space heating efficiency that UK Ecodesign rules set for new closed-fronted solid fuel stoves from 1 January 2022, so it is a floor rather than a typical figure. Older stoves and open fires can be lower. Efficiency is applied once in the calculation.
Is a wood burner cheaper than gas or electric heating?
It can be either, depending on the prices and efficiencies involved. Add your own gas or electricity price and efficiency in the optional comparison and the calculator shows the cost per kWh of useful heat and the seasonal cost for the same heat. The comparison leaves out standing charges, stove costs, servicing and sweeping, and a stove may heat one room rather than the whole home.
Does the calculator cover smoke control areas?
No. In a smoke control area you cannot release smoke from a chimney and you can only legally burn wood on a Defra exempt appliance. Check the rules for your address with your local council and on GOV.UK before relying on any running cost estimate.
Can I use it for pellets, coal or multi-fuel stoves?
This version covers seasoned logs, kiln-dried logs and heat logs or briquettes in a wood burner. Wood pellets, coal and smokeless fuel are not included.